攪拌一體車的轉速出現大的差異什么原因?
來源:http://www.wishnailspa.com/日期:2022-04-29
概述: 攪拌一體車的工藝會對它的轉速產生比較大的影響,但很多時候作為操作人員會忽略掉這一點,那么攪拌一體車的轉速出現大的差異什么原因?
攪拌一體車的工藝會對它的轉速產生比較大的影響,但很多時候作為操作人員會忽略掉這一點,那么攪拌一體車的轉速出現大的差異什么原因?
Mixing vehicle process will have a large impact on its speed, but many times as an operator will ignore this point, so what is the reason for the large difference in the speed of the mixing vehicle?
攪拌一體車內有刮刀是一種無死點混合設備,行星架上的活動刮刀和攪拌槳底部的刮刀在攪拌時不斷的將攪拌機內壁和底部的物料刮掉,從而保證物料的充分混合;傳動部件的機械密封及上下罐體間的軟密封使物料可在真空條件下混合,保證物料不致發泡及物料中的空氣成分。
The scraper inside the mixing body is a kind of non-dead point mixing equipment. The scraper on the planet rack and the scraper at the bottom of the stirring paddle are constantly scraping off the inner wall of the mixer and the material at the bottom when stirring, so as to ensure the full mixing of materials; The mechanical seal of the transmission parts and the soft seal between the upper and lower tank make the material mix under vacuum condition, to ensure that the material will not foam and remove the air component in the material.
罐體內壁經精車加工,確保刮刀可把罐體內壁上的物料完全刮掉;罐體有加熱和冷卻兩種方式。加熱罐體可通過電加熱、蒸汽加熱及油水循環加熱,客戶可根據需要選擇。釜體上裝有溫控裝置,確保物料溫度無誤差;采用液壓上升下降。
The inner wall of the tank is processed by fine car to ensure that the scraper can completely scrape off the material on the inner wall of the tank; There are two ways of heating and cooling the tank. The heating tank can be heated by electric heating, steam heating and oil-water circulation heating, customers can choose according to their needs. The kettle body is equipped with temperature control device to ensure that the material temperature without error; Hydraulic ascending and descending.
低速攪拌部件采用行星齒輪傳動,攪拌槳在公轉時也自轉,使物料上下及四周運動,從而在較短的時間內達到理想的混合效果。高速分散部件與行星架一起公轉,同時高速自轉,使物料受到強烈的剪切與分散混合,其效果為普通混合機的幾倍。
The low-speed stirring part adopts planetary gear transmission, and the stirring paddle rotates when it is in revolution, so that the material moves up and down and around, so that the ideal mixing effect can be achieved in a short time. The high-speed dispersing parts and the planetary frame revolve together, and rotate at high speed at the same time, so that the material is subjected to strong shearing and dispersing mixing, the effect is several times that of the ordinary mixer.
分散
攪拌一體車的部件分單分散軸和雙分散軸,客戶可根據需要選用;釜內低速攪拌槳與高速分散頭的轉速均采用變頻調速,可根據不用工藝不同粘度選擇不同的轉速。大家在選擇的時候根據自己的實際需求去進行選擇。
The parts of the dispersed mixing vehicle are divided into single dispersed shaft and double dispersed shaft, which can be selected according to the needs of customers; The speed of low speed stirring impeller and high speed dispersing head in the kettle adopts frequency conversion speed regulation, and different speed can be selected according to different viscosity of different processes. Everyone chooses according to their actual needs.
當我們?cè)谑褂貌煌臄嚢枰惑w車的時候會發現它的轉速是有一定的差別的,所以要認識到這一方面才行,更多內容就來網站
www.wishnailspa.com進行咨詢吧。
When we use different mixing vehicle will find that its speed is a certain difference, so to recognize this aspect of the line, more content to the website www.wishnailspa.com for consultation.