混凝土攪拌設備耐磨件的檢查!
來源：http://www.wishnailspa.com/日期：2021-02-19
概述：一般來說自動混凝土攪拌設備耐磨件要經常進行檢查，這樣才能及時的排除機械的故障，保證機械的長期穩定使用。那么都應該做哪些方面的檢查呢
一般來說自動混凝土攪拌設備耐磨件要經常進行檢查，這樣才能及時的排除機械的故障，保證機械的長期穩定使用。那么都應該做哪些方面的檢查呢?下面
混凝土攪拌機廠家就來向大家做個簡單介紹。
Generally speaking, the wear-resistant parts of automatic concrete mixing equipment should be checked frequently, so as to eliminate the mechanical failure in time and ensure the long-term stable use of the machinery. So what aspects of the inspection should be done? The following concrete mixer manufacturers will give you a brief introduction.
混凝土攪拌機耐磨件的檢查主要有兩個方面：
There are two main aspects in the inspection of wear-resistant parts of concrete mixer
1、缸體襯板的磨損程度檢查，針對攪拌臂和攪拌刀的檢查要少每周一次，保持良好的清潔工作，并且要注意查看是不是有松動移位的現象，如果磨損的程度達到一半，就要注意更換，襯板厚度2-3mm時，須更換。
1. Check the wear degree of cylinder liner. Check the mixing arm and mixing knife at least once a week. Keep good cleaning and check whether there is looseness and displacement. If the wear degree reaches half, pay attention to replacement. When the thickness of liner is 2-3mm, replace it.
2、螺栓松緊度也要及時進行檢查，一般來說新?lián)Q的攪拌機耐磨件工作兩天就要進行檢查，查看是不是有松動現象。
2. The tightness of bolts should also be checked in time. Generally speaking, the wear-resistant parts of the new mixer should be checked in two days to see if they are loose.
注意：攪拌刀要定期的進行調整，這樣才能保證發揮正常功效，如果不調整，很可能在攪拌過程中，導致攪拌刀的斷裂，并且加速磨損。
Note: the mixing knife should be adjusted regularly, so as to ensure its normal function. If it is not adjusted, it may lead to the fracture of the mixing knife and accelerate the wear during the mixing process.
Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click: concrete mixer http://www.wishnailspa.com .
全國服務熱線
點擊撥打服務熱線：400-879-1999
