出現意外的自動上料攪拌機剩料如何排除？
來源：http://www.wishnailspa.com/日期：2021-06-10
概述：自動上料攪拌機在使用的過程中有時會遇見一些意外，如果遇見這種情況罐體中的剩料應該如何清理呢？Automatic feeding mixer in the pr
自動上料攪拌機在使用的過程中有時會遇見一些意外，如果遇見這種情況罐體中的剩料應該如何清理呢？
Automatic feeding mixer in the process of using sometimes meet some accidents, if meet this kind of situation, how should the residual material in the tank body be cleaned up?
1、關閉控制室內電源開關，掛上“禁止合閘”警示牌。
1. Turn off the power switch in the control room and hang up the warning sign of "no switching on".
2、通知裝載機死機，與裝載機鏟斗對準主機下料口接料。
2. Inform the loader to crash, and align with the loader bucket to the main machine feeding port.
3、 打開倉門，工作人員穿戴好防護用具進入主機內，用鐵锨，風炮等工具清理未攪拌完混凝土。
3. Open the warehouse door, the staff wear protective equipment into the main engine, and use shovel, air gun and other tools to clean up the unfinished concrete.
4、打開卸料門，卸掉可以能卸掉的未攪拌完混凝土。
4. Open the discharging door and unload the UN mixed concrete that can be unloaded.
5、罐體內的混凝土清理完后，工作人員檢查主機內葉片是否損壞，直工作人員確認主機內底板，葉片完好，工作人員出主機后，關閉主機倉門。
5. After the concrete in the tank is cleaned, the staff shall check whether the blades in the main engine are damaged until the staff confirms that the bottom plate and blades in the main engine are in good condition. After the staff get out of the main engine, close the main engine compartment door.
6、在確定通電或者車輛運行正常情況下，工作人員觀察斜皮帶，平皮帶上的石子，砂情況，配合控制室操作員通過裝載機清理掉。
6. When the power is on or the vehicle is running normally, the staff shall observe the gravel and sand on the inclined belt and flat belt, and cooperate with the operator in the control room to clean them up by the loader.
7、清理完廢料，斜皮帶，平皮帶上砂，石子后，進行混凝土正常生產。
7. After cleaning up the waste, inclined belt, flat belt with sand and gravel, the normal production of concrete is carried out.
要是自上料攪拌機在使用的過程中出現了問題，不能夠進行運轉了就要把里面的混凝土及時排除出來，要是混凝土凝結在罐體里面，會對車輛造成腐蝕的。
If the self feeding mixer has problems in the process of use and can not operate, it is necessary to remove the concrete in time. If the concrete condenses in the tank, it will cause corrosion to the vehicle.
The above is about "how to eliminate the unexpected leftover materials from the feeding mixer?" For more information, please click on the official website: automatic feeding mixer http://www.wishnailspa.com .
全國服務熱線
點擊撥打服務熱線：400-879-1999
