攪拌一體機的漆面時間久了不處理會造成車不同程度的氧化、損壞，因此保養非常重要。有哪些漆面是需要我們保養呢？下面我們一起來看一下。

The paint surface of the mixer will be oxidized and damaged to different degrees if it is not treated for a long time, so maintenance is very important. Which paint surfaces need our maintenance? Now let's take a look.

1、漆面氧化。攪拌一體機在太陽紫外線的照射下，漆膜會不斷向空氣中蒸發油份以達到保護自身的作用，長時間就會導致漆面油分的過分散失。漆面的亮度、深度都大打折扣，使漆面慢慢發白，形成氧化層，縮短了車漆的壽命，肉眼就可觀察到車漆發烏、發白、無光澤等現象。氧化嚴重的話可以通過研磨和拋光來處理。

1. Paint oxidation. Under the sun's ultraviolet radiation, the paint film will continuously evaporate oil into the air to protect itself, which will lead to excessive loss of paint over a long period of time. The brightness and depth of the paint are greatly reduced, so that the paint slowly turns white, forming an oxide layer, shortening the life of the car paint. It can be observed with the naked eye that the car paint turns black, white, and lusterless. If the oxidation is serious, it can be treated by grinding and polishing.

2、交通膜。攪拌一體機在行駛過程中由于摩擦而產生強烈的靜電層，靜電對灰塵、油污和化學粉塵吸附能力很強，時間長了會形成一層堅硬的交通膜，這種“交通膜”易使漆面發生氧化腐蝕，這種情況可采用研磨拋光處理

2. Traffic film. During the driving process, the mixer generates a strong electrostatic layer due to friction. Static electricity has a strong adsorption capacity on dust, oil and chemical dust. Over time, a hard traffic film will be formed. This "traffic film" is easy to cause oxidation and corrosion of the paint surface. In this case, grinding and polishing can be used

3、龜裂。如果平時不對漆面作護理，金屬漆可能產生一種非常細微的裂痕，它會不斷地滲透車漆，直穿透整個色漆層，這種現象就叫“龜裂”。有時因為重噴漆質量的問題，也會產生龜裂。如果裂紋中有車蠟，會發現車身有條紋狀的龜裂現象。經常打蠟可逐漸減少龜裂的產生。

3. Cracking. If the paint surface is not cared for at ordinary times, the metal paint may produce a very fine crack, which will continuously penetrate the car paint until it penetrates the entire paint layer. This phenomenon is called "cracking". Sometimes cracks may occur due to the quality problem of re painting. If there is car wax in the crack, it will be found that the body has striped cracks. Frequent waxing can gradually reduce cracking.

4、褪色。大氣中的油煙和污染物是造成車漆變色、褪色的主要原因。褪色與氧化不同，發生褪色時，車漆會出現不均勻的色差。中、輕度的褪色可用研磨、拋光治理，嚴重時須重新噴漆。

4. Fade. The soot and pollutants in the atmosphere are the main causes of discoloration and fading of car paint. Fading is different from oxidation. When fading occurs, the car paint will have uneven color difference. Moderate and mild discoloration can be treated by grinding and polishing, and re painting is required in case of severe discoloration.

5、蝕痕。蝕痕是面狀磨蝕。昆蟲、鳥糞、樹汁、焦油、瀝青都有可能引起的蝕痕。輕微的蝕痕可用研磨拋光。

5. Etch marks. Erosion marks are surface abrasion. Insects, bird droppings, tree sap, tar and asphalt may cause erosion marks. Minor corrosion marks can be solved by grinding and polishing.

6、水痕紋。水痕紋是水滴蒸發后留下的痕跡，呈環狀。氧化、常用洗滌靈清洗的車容易染上水痕。輕微水痕紋的通過打蠟拋光可，嚴重時需研磨或噴漆。

6. Water marks. The water mark is the mark left by the evaporation of water drops, which is circular. Vehicles that are oxidized and washed with detergent are easy to get water marks. Slight water marks can be cured by waxing and polishing, and serious water marks need to be grinded or painted.

7、淺劃痕。由于摩擦及日常護理不當，攪拌一體機車漆面出現輕微的劃痕，但并未露出底漆，這種劃痕在陽光下比較明顯。一般采用的拋光方法去除。

7. Light scratches. Due to improper friction and daily care, the paint surface of the mixing integrated locomotive has a slight scratch, but the primer is not exposed, which is obvious in the sun. It is generally removed by professional polishing method.

攪拌一體機漆面保養的具體內容講解完畢，如果您對此有什么想了解的地方或者有什么需求就來我們網站http://www.wishnailspa.com咨詢吧。

After explaining the specific content of the paint maintenance of the mixing machine, if you have anything to know or need, please come to our website http://www.wishnailspa.com Consult.