Composition and function of concrete mixer:

　　攪拌機構是由水平安置的雙圓槽形拌筒與兩根按相反方向轉動的攪拌軸和其上安裝的攪拌葉片組成的。攪拌葉片的作用半徑是相互交叉的，葉片與軸中心會連成一定角度，并且前后上下都會錯開一定的空間。所以當攪拌軸開始轉動時，葉片一方面要帶動著混合料在兩個拌筒內輪番地作圓周運動，上下翻滾，同時還要在攪拌葉片相遇或重疊的部位，混合料在兩軸之間的共域相互交換體位;另一方面推動混合料沿著攪拌軸方向，不斷地從一個旋轉平面向另一個旋轉平面運動。

　　The mixing mechanism is composed of a horizontal double circular groove mixing drum, two mixing shafts rotating in the opposite direction and the mixing blades installed on it. The action radius of mixing blade is cross each other, the blade and the center of the shaft will form a certain angle, and the front and back up and down will stagger a certain space. Therefore, when the mixing shaft starts to rotate, on the one hand, the blades should drive the mixture to make circular motion and roll up and down in the two mixing drums. At the same time, at the place where the mixing blades meet or overlap, the mixture will exchange body positions in the common area between the two shafts; On the other hand, the mixture is pushed to move continuously from one rotating plane to another along the direction of mixing shaft.
               

　　取一運動的微小混凝土混合料作為一個運動單元，該單元在攪拌過程中有著復雜的運動形式。當攪拌葉片帶動該單元由拌筒底部向上運動時，由于其處在重力作用下沒有其他阻擋，混合料從由擠緊狀態松脫出來產生分散拋落，如同自落攪拌過程;當攪拌葉片推動該單元向下運動時，由于拌筒內壁和附近物料的阻力，使混合料受到擠壓力、摩擦力作用，既有大的流動，又有小范圍的擠散和重新混合，如同強制攪拌過程。

　　A moving micro concrete mixture is taken as a moving unit, which has a complex movement form in the mixing process. When the mixing blade drives the unit to move upward from the bottom of the mixing drum, due to the gravity effect, there is no other barrier, and the mixture is loose from the squeezed state, resulting in scattered throwing, just like the self falling mixing process; When the mixing blade pushes the unit downward, due to the resistance of the inner wall of the mixing drum and the materials nearby, the mixture is subject to extrusion pressure and friction, which not only has a large flow, but also has a small range of extrusion and re mixing, just like the forced mixing process.