小型攪拌機知識！
來源：http://www.wishnailspa.com/日期：2020-09-01
小型混凝土以其小巧可靈活移動的特點為很多人所知，那么小型混凝土攪拌機怎么使用呢，今天我們就來介紹一下小型混凝土攪拌機如何使用
Small concrete is known to many people for its small and flexible mobile characteristics, so how to use small concrete mixer? Today we will introduce how to use small concrete mixer
一、選擇平整堅實的場地，周圍有良好的排水溝渠，將小型混凝土攪拌機推場地，等待備用。
1、 Choose a flat and solid site with good drainage ditches around. Push the small concrete mixer to the site and wait for standby.
二、檢查混凝土攪拌機的軸承、電動機和電器元件的接線牢固，保護接零或接地電阻是否符合規(guī)定，如有異常需要立即更換。
2、 Check whether the connection of the bearing, motor and electrical components of the concrete mixer is firm and whether the protective zero connection or grounding resistance meets the requirements. If there is any abnormality, it needs to be replaced immediately.
三、接上混凝土攪拌機的電源，按下啟動按鈕，使混凝土攪拌機空載運轉，檢查攪拌桶或葉片旋轉方向與筒體上箭頭的方向是否一致。
3、 Connect the power supply of the concrete mixer, press the start button to make the concrete mixer run without load, and check whether the rotation direction of the mixing bucket or blade is consistent with the direction of the arrow on the cylinder.
四、攪拌機啟動后，應使攪拌筒達到正常轉速后進行上料，上料時及時加水。加料的次序為石子--水泥--沙子或者沙子--水泥--石子。
4、 After the mixer is started, the mixing drum shall be fed after reaching the normal speed, and water shall be added in time. The order of feeding is stone cement sand or sand cement stone.
五、混凝土攪拌機處在攪拌的工作中時，注意觀察機械的運轉情況，當有異常或軸承溫升過高等現象時，應停機檢查。
5、 When the concrete mixer is in the mixing process, pay attention to observe the operation of the machine. In case of abnormal or excessive bearing temperature rise, stop the machine for inspection.
六、完成一次攪拌工作后，將攪拌筒內的攪拌物全部倒出后，方可加入新的攪拌物。
6、 After the completion of a mixing work, pour out all the mixing materials in the mixing cylinder, and then add new mixing materials.
七、混凝土攪拌機使用過后要及時清理干凈，以免剩余的攪拌物吸附在攪拌筒壁上。
7、 After the concrete mixer is used, it should be cleaned up in time to avoid the remaining mixing materials adsorbed on the wall of the mixing cylinder.
全國服務熱線
點擊撥打服務熱線：400-879-1999
