Mixer is a kind of large-scale mechanical equipment, which needs to be operated according to the operating conditions in the process of use. However, the higher the frequency of equipment operation, the more times of fault detection. In the process of operation, there are often residual impurities in the whole production line, such as the residual impurities on the mold, and the impurities in the mortar are more common impurities.

　　模具殘留在模具上; 模具上的殘留材料是直接粘附在毛坯表面的較大顆粒，因此在切割過程中可能會損壞或直接損壞線材。 在電線上。 這樣，毛坯也可能導致未對準和規格偏差。 在嚴重的情況下，可能會斷開連接，從而導致事故。

　　The die remains on the die; the residual material on the die is the larger particles directly adhering to the surface of the blank, so the wire may be damaged or directly damaged during the cutting process. It's on the wire. In this way, the blank may also lead to misalignment and specification deviation. In severe cases, the connection may be disconnected, resulting in accidents.

　　砂漿中的雜質; 在使用攪拌機產生的廢漿時可能會產生雜質。 可能含有雜質。 當它進入泥漿罐時，將被放置未經處理或其他一些雜質。 毛坯會影響雜質，并且在切割過程中造成的損壞相對較大。 會嚴重影響產品質量。

　　Impurities in mortar; impurities may be produced when using waste slurry produced by mixer. It may contain impurities. When it enters the mud tank, it will be placed untreated or some other impurities. The blank will affect the impurities, and the damage caused in the cutting process is relatively large. It will seriously affect the product quality.
             

　　在攪拌機的操作中，經常會遇到模具中殘留的雜質和砂漿中的雜質。 為了有效避免殘留雜質和各種產物的影響，在澆注砂漿的同時可以進行嚴格的過濾，并且需要嚴格按照生產工藝及時清洗胚體，以確保生產質量。

　　In the operation of the mixer, the impurities in the mould and mortar are often encountered. In order to effectively avoid the influence of residual impurities and various products, strict filtration can be carried out while pouring mortar, and the embryo body needs to be cleaned in time strictly according to the production process to ensure the production quality.

　　打開攪拌機的功能時，如果管道堵塞在清潔管道中，則將抽水方式與清潔球結合在一起以清潔管道。 冬季清洗混凝土攪拌泵后，應將積聚的水排干，以免損壞水泵，水箱和水管。 清潔混凝土攪拌泵時，如果有必要進入攪拌桶，則除了要切斷電源并取下保險絲外，開關盒也要鎖緊。 清潔前，準備一些石頭，洗球，水和鑿子。

　　When the mixer is turned on, if the pipe is blocked in the cleaning pipe, the pumping method is combined with the cleaning ball to clean the pipe. After cleaning the concrete mixing pump in winter, the accumulated water should be drained to avoid damaging the water pump, water tank and water pipe. When cleaning the concrete mixing pump, if it is necessary to enter the mixing tank, in addition to cutting off the power supply and removing the fuse, the switch box should also be locked. Before cleaning, prepare some stones, washing balls, water and chisel.

　　外部線圈和濾波器是攪拌機中的組件，可與其他組件配合使用，以確保其他組件提供它們在攪拌機運行中應做的工作。 讓我們看一下過濾器的用法。 在生產過程中，主要對機械生產線中產生的雜質和雜質進行過濾，以確保液壓油的純度和使用時間，并確保攪拌機的內部機械設備，順利生產地墊。、

　　External coils and filters are components in the mixer and can be used in conjunction with other components to ensure that other components provide the work they should do during the mixer operation. Let's first look at the use of filters. In the production process, the impurities and impurities produced in the mechanical production line are mainly filtered to ensure the purity and service time of the hydraulic oil, and ensure the internal mechanical equipment of the mixer to produce the floor mat smoothly. ,

　　以上就是關于怎樣應對清理攪拌機殘留雜質的方法，感謝您的閱讀，希望對您有所幫助！

　　The above is about how to deal with the cleaning mixer residual impurities, thank you for reading, hope to help you!