日日夜夜天天,亚洲av永久无码精品放毛片,熟女少妇丰满一区二区,狠狠人妻777

歡迎您訪問萊州聚峰機械有限公司網站!
點擊撥打服務熱線:400-879-1999
大家都在搜: 鏟斗外翻 3.5噸A后側 3.5噸A后尾

自裝式攪拌機在換擋時有頓挫感的原因?

來源:http://www.wishnailspa.com/日期:2020-12-09

概述:大多數特殊用途的車輛變速箱都是手動齒輪,如自裝式攪拌機、汽車起重機、清障車等。換檔時,可能會出現車輛感到沮喪的情況。為什么?Most
大多數特殊用途的車輛變速箱都是手動齒輪,如自裝式攪拌機、汽車起重機、清障車等。換檔時,可能會出現車輛感到沮喪的情況。為什么?
Most special purpose vehicle gearboxes are manual gears, such as self-contained mixer, truck crane, wrecker, etc. When shifting gears, the vehicle may feel frustrated. Why?
換擋受挫的原因:自裝式攪拌機在行駛過程中換擋時,如果發動機轉速與當前的車輛速比匹配,即發動機轉速與離合器片轉速之間存在速度差(多數情況下,發動機轉速低于離合器片轉速),那么就會發生受挫。所以造成車輛換擋受挫的原因是:當時換擋時發動機轉速與車速不匹配,發動機轉速與離合器片轉速存在速度差。比如,在車輛行駛過程中,要想急劇加速,要深踩油門踏板。這時變速箱會自動降檔,提高發動機轉速,到一定高度再換高檔。換上高速檔后,因為車速會明顯下降,會產生相當明顯的挫敗感。要想保持更好的加速性能,就必須深踩油門踏板,變速箱就會以更高的速度升到更高的檔位。這時,轉移的挫敗感更加明顯。
              自動上料攪拌機
Reasons for frustration in shifting: if the engine speed matches the current vehicle speed ratio when the self-contained mixer is shifting, that is, there is a speed difference between the engine speed and the clutch plate speed (in most cases, the engine speed is lower than the clutch plate speed), then frustration will occur. Therefore, the reason for the frustration of vehicle shifting is that the engine speed does not match the vehicle speed when shifting, and there is a speed difference between the engine speed and the clutch plate speed. For example, in the process of vehicle driving, if you want to accelerate sharply, you should first step on the accelerator pedal deeply. At this time, the gearbox will automatically downshift, increase the engine speed, and then shift to high gear at a certain height. After shifting to high gear, the vehicle speed will obviously decrease, which will cause quite obvious frustration. In order to maintain better acceleration performance, it is necessary to press the accelerator pedal deeply, and the transmission will rise to a higher gear at a higher speed. At this time, the frustration of transfer is more obvious.
方案:一個更好的方法來加載混合器的挫敗感,就是在每次換檔時,離合器輸入端和輸出端的齒輪速度完全相似。雖然有點難,但是有經驗的老司機開車比較多,知道每個檔位的車速和發動機的轉速大致的速度差。找機會平穩換擋。手動換擋的速度不可能每次都掌握的那么準確。有的老司機先把離合器抬起70%,讓離合器減半。
Solution: a better way to eliminate the frustration of the loading mixer is that the gear speeds at the input and output ends of the clutch are exactly the same at each shift. Although it's a little difficult, experienced drivers drive more and know the speed difference between each gear and the engine speed. Find a chance to shift smoothly. It's impossible to master the speed of manual shift every time. Some old drivers first lift the clutch 70% to halve the clutch.

截屏,微信識別二維碼