攪拌一體機發生堵塞問題如何處理？
來源：http://www.wishnailspa.com/日期：2021-01-26
概述：攪拌一體機堵塞的處理方法如下：The treatment methods for the blockage of the mixer are as follows:1 每次充電前用水沖洗
攪拌一體機堵塞的處理方法如下：
The treatment methods for the blockage of the mixer are as follows:
1. 每次充電前用水沖洗進料口，以便在充電過程中保持進料口潮濕。
1. Flush the inlet with water before each charging to keep the inlet moist during charging.
2. 攪拌機在裝載的同時用水填充車輛附帶的洗滌水箱。
2. The mixer fills the washing water tank attached to the vehicle with water while loading.
3. 攪拌機充電后沖洗進料口并清洗進料口附近的混凝土。
3. After the mixer is charged, flush the inlet and clean the concrete near the inlet.
4. 在施工現場卸貨后，沖洗卸料槽，然后在混凝土儲罐中加入30-40L清洗水;在車輛返回行程期間，保持混凝土儲罐緩慢旋轉。
4. After unloading at the construction site, flush the discharge tank, and then add 30-40l cleaning water into the concrete storage tank; during the vehicle return journey, keep the concrete storage tank rotating slowly.
5. 攪拌一體機裝貨前，請記得將混凝土儲罐中的污水排出。
5. Please remember to discharge the sewage from the concrete storage tank before loading the mixer.
6. 每天徹底清潔混凝土儲罐和機器周圍的進出口。自動進料混合器的清潔點確保沒有水泥和混凝土結塊。
6. Clean the inlet and outlet around the concrete storage tank and machine thoroughly every day. The cleaning point of the automatic feed mixer ensures that there is no cement and concrete caking.
The above is the introduction of how to deal with the blockage problem of all-in-one mixer. I believe you all know about it. For more wonderful information, please click our website: http://www.wishnailspa.com
全國服務熱線
點擊撥打服務熱線：400-879-1999
