小型攪拌機殘?jiān)奶幚磙k法！
來源：http://www.wishnailspa.com/日期：2021-02-03
概述：小型攪拌機突然出現問題需要停放的時候，若沒有及時將攪拌罐內的殘?jiān)沓鰜?，時間一久混凝土就會凝結，不只會形成經濟損失，也會給后續的
小型攪拌機突然出現問題需要停放的時候，若沒有及時將攪拌罐內的殘?jiān)沓鰜?，時間一久混凝土就會凝結，不只會形成經濟損失，也會給后續的作業帶來許多許多的麻煩，小編告知你整理罐體混凝土的兩種辦法。
When the small mixer suddenly has problems and needs to be parked, if the residue in the mixing tank is not sorted out in time, the concrete will set after a long time, which will not only cause economic losses, but also bring a lot of troubles to the follow-up operation. Xiaobian tells you two ways to sort out the concrete in the tank.
殘?jiān)奶幚磙k法一：
Treatment method 1 of residue:
準備好緊迫驅動軟管，將問題小型混凝土攪拌機熄火，卸下液壓馬達上的高壓油管接頭。將救援車熄火，將其液壓馬達的高壓油管卸下，并與問題車上的對應接頭用緊迫驅動軟管相連。發起救援車，將其操作手柄撥出料方位，問題車內的混凝土即被排出。緊迫驅動結束后，將驅動軟管卸下，并恢復兩車原狀。
Prepare the emergency drive hose, turn off the small concrete mixer, and remove the high-pressure oil pipe connector from the hydraulic motor. Turn off the rescue vehicle, remove the high-pressure oil pipe of its hydraulic motor, and connect it with the corresponding connector on the problem vehicle with an emergency drive hose. Launch the rescue vehicle, turn its operating handle to the discharging position, and the concrete in the problem vehicle will be discharged. After the emergency drive, remove the drive hose and restore the two vehicles to their original state.
殘?jiān)奶幚磙k法二：
The second method is to treat the residue
假如上種辦法實施有困難，則有必要選用以下辦法，當即排出混凝土。在小型混凝土攪拌機殘?jiān)奶幚硗休喓蜐L道之間放入木楔，以操控攪拌筒的旋轉，必定要注意；將發起機熄火，拆松液壓馬達的一根高壓油管，攪拌筒可自在旋轉，操控攪拌筒的旋轉，使修理孔轉到下部，然后翻開修理孔，整理出筒內混凝土?；炷僚懦鼋Y(jié)束后，恢復小型混凝土攪拌機殘?jiān)奶幚淼脑瓲睢?/div>
If the above method is difficult to implement, it is necessary to select the following methods to discharge the concrete immediately. In order to control the rotation of the mixing cylinder, we must pay attention to safety by putting a wedge between the supporting wheel and the raceway of the small concrete mixer residue treatment. Turn off the engine, remove a high-pressure oil pipe of the hydraulic motor, and the mixing cylinder can rotate freely. Control the rotation of the mixing cylinder to turn the repair hole to the lower part, and then open the repair hole to sort out the concrete in the cylinder. After the concrete is discharged, the residue of the small concrete mixer shall be restored to its original state.
全國服務熱線
點擊撥打服務熱線：400-879-1999
