When using concrete mixer, we should pay attention to pressure. If the pressure of the concrete mixer is too high, pay attention to this. Stop using it. This can avoid some accidents and find a way to restore the pressure of the concrete mixer to the normal level. These are some solutions proposed by the editor for this problem.

混凝土攪拌機是這樣一種機器，其中帶有葉片的軸在圓筒中旋轉，或者可以將各種材料混合并混合以形成混合物或合適的稠度。 混合機類型很多，包括強制混合機，單軸混合機和雙軸混合機。

A concrete mixer is a machine in which a shaft with blades rotates in a cylinder or various materials can be mixed and mixed to form a mixture or a suitable consistency. There are many types of mixers, including forced mixer, single shaft mixer and double shaft mixer.

如果混凝土攪拌機在運行過程中承受過大的壓力，則過濾器很容易堵塞并且損壞了攪拌機。 因此，使用混合器時要注意壓力范圍，以免因混合器過壓而引起故障。

If the concrete mixer is under excessive pressure during operation, the filter is easy to block and damage the mixer. Therefore, pay attention to the pressure range when using the mixer to avoid failure due to overpressure of the mixer.

由于混凝土攪拌機的壓力緩慢升高，因此過濾器通常會堵塞，應定期清潔。 二是氣缸問題，因為氣缸外部有泄漏。 通常是由于活塞桿組件中的疼痛，缺乏潤滑供應，密封件和密封件的磨損或損壞，氣缸中的雜質以及活塞桿上的劃痕引起的。

Since the pressure of the concrete mixer rises slowly, the filter is usually blocked and should be cleaned regularly. The second is the cylinder problem, because there is leakage outside the cylinder. It is usually caused by pain in the piston rod assembly, lack of lubrication supply, wear or damage of seals and seals, impurities in the cylinder and scratches on the piston rod.

我們需要及時調整活塞桿的中間位置，定期檢查油霧裝置的可靠性，并及時清理。 由于導電電磁閥的發展，閥門出現故障，排氣模式被簡單地阻塞，形成了密封，并且主動閥卡在了電路故障中。 使用調音臺時，我們可以使用整個工作站的封閉式設計。 攪拌機的壓力是將間隔件和隔離室添加到混凝土攪拌機中。

We need to timely adjust the middle position of the piston rod, regularly check the reliability of the oil mist device and clean it in time. Due to the development of conductive solenoid valve, the valve fails, the exhaust mode is simply blocked, forming a seal, and the active valve is stuck in the circuit failure. When using the mixer, we can use the closed design of the whole workstation. The pressure of the mixer is to add spacers and isolation chambers to the concrete mixer.

另外，混凝土攪拌機的噪聲源主要是混合宿主。 對于機械設備，主要的噪音問題是機器本身的問題，從而提高了自身的生產水平和技術水平。 研究了該位置的制造精度，并制定了可行且完善的處理方案，以較大程度地減少設備零件之間的間隙，尤其是葉片與主攪拌機墊片之間的距離盡可能小以防止結石。 聲音變得清晰。

In addition, the noise source of concrete mixer is mainly the mixing host. For mechanical equipment, the main noise problem is the problem of the machine itself, which improves its own production level and technical level. The manufacturing accuracy of this position is studied, and a feasible and perfect treatment scheme is formulated to greatly reduce the gap between equipment parts, especially the distance between blade and main mixer gasket is as small as possible to prevent stones. The sound becomes clear.

感謝您的閱讀，此文的文章來源： 自動上料攪拌機更多的內容和問題請點擊：http://www.wishnailspa.com我們會繼續努力的為您提供服務，感謝您的支持！

Thank you for reading. The source of this article is: automatic feeding mixer. For more contents and questions, please click: http://www.wishnailspa.com We will continue to work hard to provide you with services. Thank you for your support!