攪拌一體機與攪拌機溫控系統配套的攪拌機溫控系統用夾套環繞攪拌機，并設有與蒸汽發生設備連接的蒸汽調節閥和與冷卻水連接的冷卻水調節閥。

The mixer temperature control system matched with the mixer temperature control system of the all-in-one mixer surrounds the mixer with a jacket, and is equipped with a steam regulating valve connected with the steam generation equipment and a cooling water regulating valve connected with the cooling water.

攪拌機和夾套內的實時溫度由攪拌機溫控系統測量，溫控設備采用控溫方式控制夾套內的溫度，進而完成搪玻璃攪拌機內的溫度控制;

The real-time temperature in the mixer and jacket is measured by the mixer temperature control system, and the temperature control equipment uses the temperature control method to control the temperature in the jacket, so as to complete the temperature control in the glass lined mixer;

當攪拌機溫控系統溫度低于設定值時，打開蒸汽調節閥，提高夾套內水溫和攪拌機內物料溫度；

When the temperature of the mixer temperature control system is lower than the set value, open the steam regulating valve to increase the water temperature in the jacket and the material temperature in the mixer;

攪拌一體機當測溫裝置測得的溫度高于設定值時，打開冷卻水調節閥，冷卻夾套內水溫，降低攪拌機內物料溫度，然后將攪拌機內溫度穩定在一定的溫度方案，使反應順利進行；

When the temperature measured by the temperature measuring device of the integrated mixer is higher than the set value, open the cooling water regulating valve to cool the water temperature in the jacket, reduce the material temperature in the mixer, and then stabilize the temperature in the mixer at a certain temperature scheme to make the reaction proceed smoothly;

與控溫系統配套的攪拌機一般安裝在玻璃攪拌器上，也可以安裝在槳式或葉輪式攪拌器上；

The mixer matched with the temperature control system is generally installed on the glass mixer, and can also be installed on the paddle type or impeller type mixer;

用戶在使用攪拌機溫控系統后，一定要知道不同廠家的攪拌機溫控系統的特點和性能也是不同的，所以了解攪拌機溫控系統的特點是很有必要的。

After using the mixer temperature control system, users must know that the characteristics and performance of mixer temperature control systems from different manufacturers are also different, so it is necessary to understand the characteristics of mixer temperature control system.

此外攪拌器軸和葉片不能在彎曲或變形的情況下運行。如果軸彎曲或刀片變形，請立即停機進行處理或更換。攪拌系統運行過程中，嚴禁雜物進入反應池，以免損壞攪拌軸和葉片。

In addition, the agitator shaft and blades shall not operate under bending or deformation. If the shaft is bent or the blade is deformed, stop the machine immediately for treatment or replacement. During the operation of the mixing system, sundries are strictly prohibited from entering the reaction tank to avoid damaging the mixing shaft and blades.

如果人們需要進入反應罐進行清潔或維護，必須切斷電機電源，并懸掛“禁止關閉”的警告標志。在手動清洗和維護反應罐時，必須有專人在反應罐外進行監督。

If people need to enter the reaction tank for cleaning or maintenance, they must cut off the power supply of the motor and hang a warning sign of "no shutdown". When manually cleaning and maintaining the reaction tank, special personnel must be assigned to supervise outside the reaction tank.

攪拌一體機攪拌系統運行一段時間后，如果反應罐底部有沉淀物、雜質和雜物，應及時停止，用清水沖洗或人工清理，以確保攪拌器的運行。

After the mixing system of the all-in-one mixer operates for a period of time, if there is sediment, impurities and sundries at the bottom of the reaction tank, it shall be stopped in time, washed with clean water or manually cleaned to ensure the safe operation of the mixer.

以上就是今天為大家分享的關于問題的相關內容，希望對大家能有所幫助，想要了解更多內容可以電話聯系我們或者關注我們的網站http://www.wishnailspa.com。

The above is the relevant content about the problem shared for you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://www.wishnailspa.com 。