2方后置駕駛室攪拌機
來源：http://www.wishnailspa.com/日期：2020-04-26
概述：2方后置駕駛室自上料攪拌機選購技巧：2-party rear cab self loading mixer selection skills:1、按照工藝條件、攪拌目的和要求，選
2方后置駕駛室自上料攪拌機選購技巧：
2-party rear cab self loading mixer selection skills:
1、按照工藝條件、攪拌目的和要求，選擇攪拌器類型，選擇攪拌器類型時應該充分了解攪拌器的動力特征和其在攪拌過程中所產生的流動狀態與各種攪拌的關系。
1. According to the process conditions, mixing purpose and requirements, the type of agitator should be selected. When selecting the type of agitator, we should fully understand the dynamic characteristics of the agitator and the relationship between the flow state and various kinds of mixing.
2、按照電動機功率、攪拌轉速和工藝環境，從減速機選型中選擇減速機機型。如果按照實際工作來選擇減速機，則實際工作扭矩應該小于減速機可用的扭矩。
2. According to the motor power, mixing speed and process environment, the reducer type is selected from the reducer selection. If the reducer is selected according to the actual work, the actual working torque should be less than the available torque of the reducer.
3、按照機架的公稱心寸DN、攪拌軸的擱軸型式及壓力等級、選擇安裝底蓋、凸緣底座或凸緣法蘭。
3. According to the nominal size DN of the frame, the type and pressure rating of the mixing shaft, the bottom cover, flange base or flange should be installed.
4、按照所確定的攪拌器型式及攪拌器在攪拌過程中所產生的流動狀態，工藝對攪拌混合時間、沉降速度、分散度的控制要求，通過實驗手段和計算機模擬設計，確定電動機功率、攪拌速度、攪拌器直徑。
4. According to the determined type of agitator, the flow state of agitator in the process of mixing, and the control requirements of process on mixing time, sedimentation speed and dispersion, the motor power, mixing speed and agitator diameter are determined by experimental means and computer simulation design.
5、按照支承和抗振條件，確定是否配置輔助支承。
5. According to the support and anti vibration conditions, determine whether to configure auxiliary support.
全國服務熱線
點擊撥打服務熱線：400-879-1999
