自動上料攪拌機是組成混凝土攪拌站制備混凝土流程中關鍵機器，若要更換水泥攪拌機的攪拌葉，在拆卸攪拌機時要注意部件的拆卸順序以及位置，在完成水泥攪拌機葉片的更換后把部件歸位。

　　The automatic feeding mixer is a key machine in the process of preparing concrete in the concrete mixing station. If the mixing blades of the cement mixer need to be replaced, attention should be paid to the disassembly sequence and position of the components when the mixer is disassembled, and the parts shall be put back after the replacement of the blades of the cement mixer.

　　自動上料攪拌機中攪拌葉安裝注意事項？

　　Precautions for installation of mixing blade in automatic feeding mixer?

　　1.攪拌機的攪拌葉的傾角要一致，不能裝反；

　　1. The inclination angle of the mixing blade of the mixer should be consistent, and it should not be installed in reverse;

　　2.攪拌葉傾角過大或過小都會影響攪拌產量，所以葉片與攪拌軸線的傾角在70度或80度左右即可；

　　2. Too large or too small inclination angle of the mixing blade will affect the mixing output, so the inclination angle between the blade and the mixing axis is about 70 or 80 degrees;
                 

　　3.攪拌葉的角度是旋轉上部露出泥料20-30mm；

　　3. The best angle of the mixing blade is to rotate to the upper part and expose the mud 20-30mm;

　　4.兩根軸上攪拌葉的相位應與漆相對會在時的相位錯開90度；

　　4. The phase of mixing blades on the two shafts should be staggered by 90 degrees from the phase when the paint is opposite to each other;

　　5.安裝攪拌葉時一定要上緊，應盡量上緊攪拌葉上的頭一個螺母。

　　5. When installing the mixing blade, be sure to tighten the first nut on the mixing blade as much as possible.

　　攪拌機葉片直接與砂石接觸，損耗速度快，要按照攪拌站設備管理制度把機器的檢修工作落實到位，為攪拌站創造穩定的工作環境。

　　The blades of the mixer are in direct contact with sand and gravel, and the loss rate is fast. According to the equipment management system of the mixing plant, the maintenance work of the machine should be carried out in place to create a stable working environment for the mixing station.

　　以上自動上料攪拌機中攪拌葉安裝注意事項的相關介紹，希望能夠幫到大家，想要了解更多內容歡迎點擊我們的http://www.wishnailspa.com網站。

　　The above automatic feeding mixer mixing blade installation precautions related to the introduction, hope to help you, want to learn more, welcome to click our http://www.wishnailspa.com Website.