What are the cleaning methods of cement mixer sludge?

水泥攪拌機產生油泥，是否有辦法呢？小編就給大家?guī)?lái)水泥攪拌機油泥的清理方法。

Is there any way to solve the sludge produced by cement mixer? Xiaobian to bring you cement mixer sludge cleaning methods.

所謂，知己知彼百戰不殆。我們要先知道水泥攪拌機油泥的構成，油泥是長期使用礦物油殘留的東西，發動機里如果加了機油添加劑，那么就更容易積油垢。那么知道了它是礦物油的殘留，我們根據相似相溶的原理，找干凈的油進行清洗。我們身邊的油，無非柴油和汽油。那么它產生油泥無非本體就是柴油和汽油。我們先用柴油進行浸泡處理，再用汽油進行刷洗處理就可以使得發動機的油泥消失殆盡。對于機油泵，須要仔細清洗，他是油泥集中存在的地方，拆洗過后的墊子不能再用，防止對機油泵造成污染。

As the saying goes, know yourself and know your enemy, and you will be invincible in a hundred battles. First of all, we need to know the composition of cement mixer sludge. Sludge is the residue of mineral oil used for a long time. If the engine oil additive is added to the engine, it is easier to accumulate oil dirt. So we know that it is a residual mineral oil, we find clean oil for cleaning according to the principle of similar phase dissolution. All the oil around us is diesel and gasoline. Then it produces sludge is nothing more than diesel and gasoline. We first use diesel oil for soaking treatment, and then use gasoline for brushing treatment, which can make the engine sludge disappear. For the oil pump, it is necessary to clean it carefully. It is the place where the oil sludge is concentrated. The cushion removed and cleaned can not be used again to prevent the oil pump from being polluted.
                

有人會問小編，你這些都是拆機進行清洗，很麻煩而且成本很高，有沒有不拆機的清洗成本低一點的。那么，下面小編就告訴你這種清洗方法。

Some people will ask Xiaobian, these are all machine dismantling for cleaning, which is very troublesome and expensive. Is there any cleaning cost lower without dismantling the machine. Well, the following small series will tell you this cleaning method.

一般不拆發動機有兩種簡單清洗方法，一種添是加在機油里的清洗油，還有一種是用機器接在發動機上，用一種清洗劑循環沖洗。但是這兩種清洗只適合不太嚴重的油泥的堆積，對于嚴重的油泥堆積這樣的方法并不有效。

Generally, there are two simple cleaning methods without dismantling the engine. One is to add the cleaning oil added to the engine oil, and the other is to connect the machine to the engine and wash it with a cleaning agent. However, these two cleaning methods are only suitable for the less serious sludge accumulation, which is not effective for the serious sludge accumulation.

那么有人會問小編，如何判斷油泥的積累程度？別急，一步步來，這就是下面要講的問題。

Then someone will ask Xiaobian, how to judge the accumulation of sludge? Don't worry. Step by step, that's what we're going to talk about.

如果你的混凝土攪拌機油耗和噪音明顯增加，那么你的車油泥積累肯定很厚。那么二種的操作明顯不行，在采取了一種方法后沒有好轉。我們就需要采用這種方法。小型混凝土攪拌機發動機里的油泥想清洗，須要把發動機解體，用超聲波機才清洗的干凈。裝才能保證混凝土攪拌機的機器油泥達到標準。

If the fuel consumption and noise of your concrete mixer increase significantly, the sludge accumulation of your truck must be very thick. Then the two operations are obviously not good, and they are not improved after one method is adopted. We need to take this approach. If you want to clean the sludge in the engine of small concrete mixer, you need to disassemble the engine and clean it with ultrasonic machine. In order to ensure that the machine sludge of the concrete mixer reaches the standard.