Automatic feeding mixer is the main special vehicle in construction engineering. Maintenance is very important, especially for the frequently used parts. After maintenance, the service life of the mixer can be increased. Let's see how to maintain the vulnerable parts of the mixer. What are the easily damaged parts of self feeding mixer? The easily damaged parts mainly refer to the frequently used parts of the mixer, such as hydraulic system, roller, raceway, water tank, engine and so on.

說托輪，我們都知道 自上料攪拌機在行駛過程中罐體是一直轉動的，這樣才能保證罐內的混凝土不凝固，不離析，罐體的轉動離不開托輪和滾道，這兩個部位一旦出問題就會造成非常嚴重的后果——混凝土凝結。所以這兩個部位的保養是長久性的，托輪和滾道之間要經常涂抹潤滑油，對于滾道上的污物要及時清理，以免影響罐體轉動。

First of all, the supporting wheel. We all know that the tank body of the self feeding mixer is always rotating in the process of driving, so as to ensure that the concrete in the tank does not solidify and separate. The rotation of the tank body cannot be separated from the supporting wheel and the raceway. Once there is a problem in these two parts, it will cause very serious consequences - concrete condensation. Therefore, the maintenance of these two parts is long-term. Lubricating oil should be often applied between the roller and the raceway, and the dirt on the raceway should be cleaned in time, so as not to affect the rotation of the tank.
             

自動上料攪拌機上的液壓系統也是非常重要的，攪拌罐側操作主要是依靠液壓系統來實現的，它的保養也是關重要的，比如液壓油要定期更換，不要使用劣質液壓油，對于液壓軟件要經常檢查，潤滑度不夠的要及時添加潤滑油脂，如有損傷元件要及時更換，保證液壓系統的靈活使用。

The hydraulic system of the automatic feeding mixer is also very important. The operation of the mixing tank side mainly depends on the hydraulic system, and its maintenance is also very important. For example, the hydraulic oil should be replaced regularly. Do not use inferior hydraulic oil. The hydraulic software should be checked frequently. If the lubrication degree is not enough, the lubricating grease should be added in time. If there is damage, the components should be replaced in time to ensure the safety Flexible use of hydraulic system.

自動上料攪拌機上水箱的大小及安裝部位都是廠家經過設計師的精心設計的，所以不要隨意的改動，水箱的視水管和過濾網偶爾也要查看一下，視情況更換，以免引起堵塞，影響水位的判斷，在冬天工作完成后要及時的將水箱內的水排出，以免結冰引起水箱開裂。

The size and installation position of the water tank of the automatic feeding mixer are carefully designed by the manufacturer, so don't change it at will. The water pipe and filter screen of the water tank should be checked occasionally and replaced according to the situation, so as to avoid blockage and affect the judgment of water level. After the work is completed in winter, the water in the water tank should be discharged in time, so as not to cause the water tank cracking due to freezing.

發動機的使用也是非常多的，所以對發動機的保養也要注意，尤其是機油，要經常查看機油，發現機油變質要及時更換，油量變少要及時添加。對于新買的 自上料攪拌機要注意螺栓，因?yàn)樾萝囋谑褂靡欢螘r(shí)間后各部位的螺栓容易松動，所以在使用的過程中要十分注意，發現松動螺栓及時緊固；新車的行駛速度不易過快也不易過慢，要按規定的時間進行保養。

The use of the engine is also very much, so we should pay attention to the maintenance of the engine, especially the engine oil. We should check the engine oil frequently. If the engine oil deteriorates, we should change it in time. If the oil volume becomes less, we should add it in time. For the newly purchased self loading mixer, pay attention to the bolts, because the bolts of all parts of the new car are easy to loosen after a period of use, so we should pay great attention in the process of use, and timely tighten the loose bolts; the driving speed of the new car is not easy to be too fast or too slow, and the maintenance should be carried out according to the specified time.