How to deal with water in engine oil of concrete mixer?

專用車的車型有很多，比如轎運車、攪拌車、隨車吊、清障車、油罐車等等，在專用車的使用過程中可能會出現發動機機油進水的情況，此時該怎么處理呢？一起來看一下吧。

There are many types of special vehicles, such as sedan car, mixer, truck mounted crane, obstacle clearing car, oil tank car, etc. during the use of special vehicles, the engine oil may get into the water. What should be done at this time? Let's have a look.

一、發動機機油進水后會有哪些表現呢？

1、 What is the performance of the engine oil after water entry?

1. 如果車輛的發動機機油進水比較大，機油的油面會升高，我們可以觀察機油的油尺，一旦機油中含水量過高，那么潤滑油的液面就會超出油尺標注的范圍。

1. If the water in the engine oil of the vehicle is relatively large, the oil level of the engine oil will rise. We can observe the oil dipstick. Once the water content in the engine oil is too high, the level of the lubricating oil will exceed the range marked on the dipstick.

2. 如果發動機的某些部件損壞，那么發動機冷卻液就會進入潤滑系統，而這時往往也會在冷卻液中發現機油，所以檢查發動機冷卻液中是否含有機油也是檢驗機油是否進水的一個方法。

2. If some parts of the engine are damaged, the engine coolant will enter the lubrication system, and oil will often be found in the coolant at this time. Therefore, checking whether the engine coolant contains oil is also a way to check whether the oil has water.
                 

3. 混凝土攪拌機仔細觀察機油的外觀狀態，也可以看出機油中是否含有水，不含水的機油呈現的是半透明的油質亮色，而含有水的機油會呈現出不透明的褐色或土黃色，如果機油中含有水分，發動機運轉一段時間后，機油就會出現乳白色。

3. Carefully observe the appearance of the engine oil of the concrete mixer, you can also see whether there is water in the engine oil. The engine oil without water presents translucent oil color, while the engine oil with water will present opaque brown or yellowish. If the engine oil contains water, the engine oil will appear milky white after running for a period of time.

二、機油進水一般是哪些原因造成的呢？

2、 What are the general causes of water in engine oil?

1. 機油散熱器損壞會導致機油進水，機油散熱器損壞，散熱器管路發生破損，散熱器外部的水會滲透到機油散熱器里面，從而導致機油進水。

1. If the oil radiator is damaged, the oil will enter the water. If the oil radiator is damaged, the radiator pipe will be damaged, and the water outside the radiator will penetrate into the oil radiator, which will cause the oil to enter the water.

2. 發動機缸套密封圈出現損壞也會導致機油進水。濕式缸套直接與冷卻水接觸，缸套下部的密封圈可以有效的防止機油和冷卻水的滲漏，發動機長時間運行以后，密封圈是很容易失效的，缸套密封圈損壞是機油進水的一個主要原因，所以，在檢查機油進水原因的時候，一定要記得檢查缸套密封圈是否完好。

2. The damage of engine cylinder liner sealing ring will also lead to water in the engine oil. The wet cylinder liner is in direct contact with the cooling water. The sealing ring at the lower part of the cylinder liner can effectively prevent the leakage of oil and cooling water. After the engine runs for a long time, the sealing ring is easy to fail. The damage of the sealing ring of the cylinder liner is one of the main reasons for the water in the oil. Therefore, when checking the cause of the water in the oil, we must remember to check whether the sealing ring of the cylinder liner is in good condition.

3. 氣缸墊損壞也會導致機油進水，發動機汽缸墊的作用是密封各氣缸以及各氣缸對應的水道和機油油道，從而避免機油進水，如果氣缸墊發生損壞，水循環速度比較快，水道內的水就會流進機油油道，造成機油進水，在每次拆卸完發動機后，一定要使用新的汽缸墊，以免汽缸墊損壞造成機油進水，從而導致發動機損壞。

three If the cylinder gasket is damaged, the water in the water channel will flow into the oil channel, which will cause the water to enter into the oil channel. After each disassembly of the engine, be sure to use a new cylinder gasket, In order to avoid cylinder gasket damage caused by oil water, resulting in engine damage.

以上是混凝土攪拌機詳述專用車發動機機油進水的介紹方法，希望對大家有所幫助，如想了解更多精彩資訊請點擊我們的網站：http://www.wishnailspa.com

The above is the introduction method of the water in the engine oil of the concrete mixer. I hope it can help you. For more wonderful information, please click our website: http://www.wishnailspa.com