攪拌機液壓油缸需要注意什么？
來源：http://www.wishnailspa.com/日期：2021-07-12
混凝土自動上料攪拌機液壓油缸大家都知道是個密封的元件，液體都在缸里，那有的外面怎么也是濕淋淋的呢？這個大家就要注意了，說明這個混凝土自動上料攪拌機液壓油缸存在問題。下面就看看有哪些問題：
We all know that the hydraulic cylinder of the automatic concrete feeding mixer is a sealed component. The liquid is in the cylinder. How can some of the outside be wet? We should pay attention to this. It shows that there is a problem with the hydraulic cylinder of the automatic concrete feeding mixer. Let's take a look at the problems:
1、在裝配混凝土自動上料攪拌機液壓油缸的時候可能把端蓋裝偏了，活塞桿不在缸筒的中心，這樣活塞桿就動不了，還幫助破壞密封件。
1. When assembling the hydraulic cylinder of the automatic concrete feeding mixer, the end cover may be biased, and the piston rod is not in the center of the cylinder, so the piston rod can not move, and it also helps to damage the seal.
2、工作臺的導軌面和混凝土自動上料攪拌機液壓油缸不怎么平行，導致活塞桿動作困難。
2. The guide surface of the worktable is not parallel to the hydraulic cylinder of the automatic concrete feeding mixer, which makes it difficult for the piston rod to move.
3、安裝的密封件有劃傷，密封唇放反，唇口破損或軸倒角尺寸不對，或是裝錯了、沒裝密封件。
3. The installed seal is scratched, the sealing lip is reversed, the lip is damaged or the shaft chamfer size is wrong, or the seal is installed wrong or not installed.
4、密封壓蓋沒裝好，用來緊固的螺釘沒事一樣的力。
4. The sealing gland is not installed properly, and the screw used for fastening has the same force.
5、密封件放的時間太長了老化失效了；存放的時候沒放好，弄壞或變形了；質(zhì)量不好，大小不一樣
5. The seal has been put in for a long time, aging and failure; When it is stored, it is damaged or deformed; The quality is not good, the size is different
6、活塞桿和溝槽沒加工好就用了。
6. The piston rod and groove were used before they were machined.
7、油用錯了或油混了別的，粘度過低。
7. The viscosity of the oil is too low when it is used incorrectly or mixed with other oil.
8、周圍環(huán)境太高，導致有的溫度很高很高。
8. The surrounding environment is too high, resulting in some very high temperature.
9、不正常的振動。
9. Abnormal vibration.
感謝您的閱讀，希望以上內(nèi)容對您有所幫助！
Thank you for your reading. I hope the above content can help you!
全國服務熱線
點擊撥打服務熱線：400-879-1999
