Chassis selection

攪拌車底盤能夠應對各種路況，不輕易出問題，日常行駛無壓力，發動機要穩定、動力強，整車綜合性能要保證良好，能省油……多數朋友們在選底盤的時候會問到這些問題。如何選擇，小瑞還是建議以企業為導向。保障攪拌車底盤能夠給上裝的液壓系統提供充足的動力源。

The chassis of the mixer truck can cope with various road conditions and is not easy to cause problems. There is no pressure in daily driving. The engine should be stable and powerful. The comprehensive performance of the whole vehicle should be good and can save fuel... Most friends will ask these questions when choosing the chassis. How to choose, Xiao Rui still suggests brand orientation. Ensure that the mixer chassis can provide sufficient power source for the installed hydraulic system.

說到底盤，就不得不提到底盤的三大件：發動機、變速器、車橋。發動機動力是否強勁，排放標準幾何，油耗多少？變速器幾個檔位，節油性能怎么樣？車橋里前橋多重，后橋多重，承載力如何？都需要朋友們仔細詢問。

When it comes to the chassis, we have to mention the three major parts of the chassis: engine, transmission and axle. Is the engine powerful, the emission standard geometric, and the fuel consumption? How about the fuel saving performance of the transmission in several gears? How heavy is the front axle and the rear axle in the axle? What is the bearing capacity? All need friends to ask carefully.

關于底盤到底是選進口還是買國產，也是需要各位朋友權衡利弊?？偟膩碚f：進口底盤確實好，主流五十鈴日產柴，日野三菱能見到，優勢就是維修少，操作方便油耗小，但是價格很困擾，方量普遍也很小，九方以上找不到。國產企業兩大寶，維修方

As for whether the chassis is imported or domestic, you also need to weigh the pros and cons. Generally speaking, the imported chassis is really good. The mainstream Isuzu Nissan Diesel and Hino Mitsubishi can see it. The advantage is less maintenance, convenient operation and low fuel consumption. However, the price is very troublesome, and the square volume is generally very small. It can't be found above Jiufang. Domestic brands, two treasures, maintenance party

便價格好，品質逐漸在反超，方量也能任你挑，經濟實惠性價比高。

The price is good, the quality is gradually surpassing, and the square quantity can be chosen by you. It is economical and cost-effective.

液壓系統

Hydraulic system

在液壓系統中，重要的是油泵和馬達。攪拌車會經常處于高負荷狀態，所以對于它整個液壓系統的穩定性要求很高，攪拌罐一停，可能導致罐內的混凝土凝固。所以，液壓系統馬虎不得。

In the hydraulic system, the oil pump and motor are important. The mixer truck is often in a high load state, so it has high requirements for the stability of the whole hydraulic system. Once the mixing tank stops, the concrete in the tank may solidify. Therefore, the hydraulic system should not be sloppy.

常用進口及國產液壓系統：

Common imported and domestic hydraulic systems:

各位朋友們在購買攪拌車的時候一定要詢問清楚，液壓油泵、馬達和減速機用的是什么企業，這些企業在行業內的地位如何。

When you buy a mixer truck, you must ask clearly what brands are used for hydraulic oil pump, motor and reducer, and what is the status of these brands in the industry.

攪拌罐

Mixing tank

對于攪拌罐來說，耐磨性是要義。罐體采用什么樣的材質和生產工藝，直接影響到質量大關是否有保障。攪拌罐一般是采用高強度耐磨鋼制作而成。一定要注意的是，有些企業會在鋼板的厚度上做文章，同時，要注意攪拌罐內的葉片是否也是高強度的耐磨合金材質。

For the mixing tank, wear resistance is the essence. What kind of material and production process are adopted for the tank body directly affects whether the quality level is guaranteed. The mixing tank is generally made of high-strength wear-resistant steel. It must be noted that some brands will make an issue on the thickness of the steel plate. At the same time, pay attention to whether the blades in the mixing tank are also made of high-strength wear-resistant alloy.

其次，設計和配置是否合理也關重要。攪拌車是否符合國內的運輸和路況，配置是否能夠有效提升車輛使用的便捷性和性都要綜合考慮在內.再次，輕量化已成行業趨勢。輕量化的設計能大大增加裝載量，為用戶帶來更高的運

Secondly, whether the design and configuration are reasonable is also very important. Whether the mixer meets the domestic transportation and road conditions and whether the configuration can effectively improve the convenience and safety of vehicle use should be taken into account. Thirdly, lightweight has become an industry trend. The lightweight design can greatly increase the loading capacity and bring higher transportation for users

營價值啊。

Business value.

罐車制造工藝水平的高低影響攪拌罐的使用壽命，包括焊縫強度、制件及涂裝質量在內等等工藝都是評價攪拌罐的重要標準。而如何保證制造的精度和產品的一致性，則需要落腳到是否擁有規模化的數字化、智能化生產線。

The level of tank car manufacturing process affects the service life of the mixing tank. The process, including weld strength, parts and coating quality, is an important standard for evaluating the mixing tank. How to ensure the manufacturing accuracy and product consistency, we need to focus on whether we have a large-scale digital and intelligent production line.

買車的時候不要貪圖小便宜，對攪拌車企業有足夠的了解，不單單是價格的對比，若有必要，去工廠實際考察一番或許會讓你收獲更多。

When buying a car, don't be greedy for small and cheap. You have enough knowledge of the mixer brand, not just the price comparison. If necessary, you may gain more by going to the factory for an actual investigation.