Our strengths:

1、罐體材料：攪拌機罐體采用T610鋁鎂合金特種鋼，其它廠家采用Q235普通碳鋼，強度相差1.6-2陪。

1. Tank material: the mixer tank uses T610 aluminum magnesium alloy special steel, other manufacturers use Q235 ordinary carbon steel, the strength difference is 1.6-2%.

2、攪拌葉片：采用對數雙螺旋結構葉片，通過三維建模模式，按照劃線距離準確安裝，葉片角度更合理，在不同的錐段安裝不同的葉片，保障混凝土質量，不會造成離析，同時保證進出料的速度。

2. Mixing blade: the logarithmic double helix structure blade is adopted. Through the three-dimensional modeling mode, the blade is installed accurately according to the marking distance, and the blade angle is more reasonable. Different blades are installed in different cone sections, so as to ensure the quality of concrete, avoid segregation, and ensure the speed of feeding and discharging.

3、按照三一重工、中集凌宇生產標準，流水線生產作業，其它小廠家生產工藝雜亂，裝配工藝簡單。

3. According to Sany Heavy Industry and CIMC Lingyu production standards, assembly line production, other small manufacturers' production process is messy, and assembly process is simple.

4、罐體采用二氧化碳保護焊，環形焊縫自動焊接，焊接平整美觀無氣泡。

4. The tank body adopts CO2 shielded welding, and the girth weld is welded automatically. The welding is smooth and beautiful without bubbles.

5、罐體整體設計角度更加合理，安裝傾斜角度小，整車中心低，行駛穩定性好。

5. The overall design angle of the tank is more reasonable, the installation angle is small, the center of the vehicle is low, and the driving stability is good.