The maintenance of automatic feeding mixer can not be ignored. If properly maintained, not only can improve work efficiency, but also can extend the service life of independent mixer. Therefore, let's take a look at the maintenance requirements of today's Xiaobian automatic feeding mixer.

1.自動上料攪拌機將定期清潔燃油系統并控制積碳的產生，以使發動機保持良好狀態。

1. The automatic feeding mixer will clean the fuel system regularly and control the generation of carbon deposit to keep the engine in good condition.

2.為自動上料攪拌使用適當質量等級的油。對于發動機，應根據以下條件選擇SD-SF級發動機油：進氣和排氣系統的附加設備和運行條件；柴油機應根據機械負荷使用CB-CD級柴油。選擇規格基于不少于制造商的規定。

2. Use oil of appropriate quality grade for automatic feeding mixing. For engines, sd-sf grade engine oil should be selected according to the following conditions: additional equipment and operating conditions of intake and exhaust system; The diesel engine should use cb-cd diesel according to the mechanical load. The selected specifications are based on not less than the manufacturer's specifications.

3.攪拌機的機油和濾芯將定期更換。在任何質量等級的運行過程中，機油質量都會發生變化。為了防止出現問題，應根據使用條件定期更換機油，并且機油的用量應適中（通常是潤滑脂的上限）。

3. The engine oil and filter element of the mixer will be changed regularly. The quality of engine oil will change during the operation of any quality level. In order to prevent problems, the oil should be changed regularly according to the service conditions, and the amount of oil should be moderate (usually the upper limit of grease).

4.設備齊全的攪拌機堅持曲軸箱的良好通風。

4. The mixer with complete equipment should adhere to the good ventilation of the crankcase.

5.攪拌機的保養。三種濾清器：三種濾清器是指空氣濾清器，機油濾清器和燃油濾清器。當今的大多數發動機都裝有PCV氣門（曲軸箱強制通風），但是氦氣中的污染物會沉積在PCV氣門周圍，這可能會阻塞氣門。因此，必須定期清潔PCV閥周圍的污染物。

5. Maintenance of mixer. Three filters: three filters are air filter, oil filter and fuel filter. Most of today's engines are equipped with PCV valves (positive crankcase ventilation), but contaminants in helium will deposit around the PCV valves, which may block the valves. Therefore, contamination around the PCV valve must be cleaned regularly.

6.攪拌機會定期清潔曲軸箱。

6. Clean the crankcase regularly.

在發動機運轉期間，焚化爐中的高壓未燃燒氣體，酸，水分，硫和氮氧化物將通過活塞環和氣缸壁之間的間隙進入曲軸箱，并與燃燒產生的金屬粉末混合。零件磨損。污泥。因此，應定期清潔曲軸箱，以保持發動機內部清潔。

During engine operation, the high pressure unburned gases, acids, moisture, sulfur and nitrogen oxides in the incinerator will enter the crankcase through the gap between the piston ring and the cylinder wall and mix with the metal powder produced by combustion. Wear of parts. Sludge. Therefore, the crankcase should be cleaned regularly to keep the engine clean.

7.攪拌機的發動機機油箱生銹和結垢是更常見的問題。鐵銹和水垢會限制冷卻液在冷卻系統中的移動，降低散熱效果，導致發動機過熱，甚損壞發動機。因此，必須定期清潔水箱，以水箱之間的銹蝕和水垢。

7. Rust and scaling are more common problems in the engine oil tank of mixer. Rust and scale will limit the movement of coolant in the cooling system, reduce the heat dissipation effect, cause engine overheating, and even damage the engine. Therefore, the water tank must be cleaned regularly to remove the rust and scale between the water tanks.