混凝土攪拌機發動機外部保養?
來源:http://www.wishnailspa.com/日期:2020-07-22
概述: 1、將混凝土攪拌機電器用塑料薄膜遮罩,然后用半濕性毛巾壓蓋于薄膜上側,以防高壓水沖進分電器,致使拌和車難以發動; 1 First
1、將混凝土攪拌機電器用塑料薄膜遮罩,然后用半濕性毛巾壓蓋于薄膜上側,以防高壓水沖進分電器,致使拌和車難以發動;
1. First, cover the electric appliance of concrete mixer with plastic film, and then cover it with semi wet towel on the upper side of the film to prevent high-pressure water from rushing into the distributor, which makes the mixer difficult to start;
2、運用高壓水槍由拌和車發動機旁邊面按從上到下的次序?qū)⒁媸覂?nèi)側及拌和車發動機表面的附著類污物沖凈;
2. Use high-pressure water gun to clean the attached dirt on the side of the mixer engine from top to bottom;
3、直接將拌和車發動機外部清洗劑均勻噴灑于泅濕后的拌和車發動機及引擎室周邊;
3. Spray the external cleaning agent of mixer engine directly on the engine of mixer and the surrounding of engine room after swimming;
4、閃涼3min后,用纖維毛刷清洗引擎室內所能觸及到的所有部件;
4. After 3 minutes flash cooling, clean all parts that can be touched in the engine room with fiber brush;
5、用高壓水槍快速沖凈刷洗掉的污物;
5. Use a high-pressure water gun to quickly wash away the dirt;
6、然后再將攪拌車發動機外部清洗劑噴灑于引擎表面,操作過程同上;循環往復,直將攪拌車發動機表面清洗潔凈;
6. Then spray the external cleaning agent on the engine surface of the mixer, and the operation process is the same as above; repeat until the surface of the mixer engine is clean;
7、更終將沖洗潔凈的攪拌車發動機用半濕性毛巾擦干,并用吸塵吸水風干機將手不易觸及到的當?shù)匚?,然后風干;
7. Finally, dry the washed and clean mixer engine with a semi wet towel, and use a suction and water absorption air dryer to dry the local areas hard to reach by hand, and then air dry;
8、用塑料橡膠保護劑對引擎室內側的塑料橡膠部件進行上光,然后再將金屬部件鍍膜;
8. Polish the plastic rubber parts inside the engine room with plastic rubber protector, and then coat the metal parts;
9、更終對護理結束的攪拌車發動機和引擎室內側用潔凈的無紡拋光巾進行查驗。
9. Finally, clean non-woven polishing towel was used to inspect the engine and the side of the engine room after the nursing.