1. The temperature of reducer is too high

導致減速器溫度過高的原因主要包括兩方面。，減速器在使用的過程中軸承負荷較大。大負荷狀況導致軸承之間的摩擦加劇，摩擦生熱導致零件、機械局部高溫的產生。第二，在使用減速器的過程中油的黏度過高或過低。油的黏度可以在很大程度上增加軸承的負荷，導致軸承產生巨大的熱量。當油的黏度過大時，整體流動性大幅降低，軸承在運行的過程中需要更大的動力，這部分動力非常容易轉換為熱能，導致加速度溫度升高。而當油的黏度過小時潤滑效果降低，摩擦阻力加大，也造成軸承運轉過程中的動力增加。

There are two main reasons for the high temperature of the reducer. First, the bearing load of the reducer is large in the process of use. The high load condition leads to the friction between the bearings, and the friction heat causes the local high temperature of parts and machinery. Second, the viscosity of oil is too high or too low in the process of using the reducer. The viscosity of the oil can increase the load of the bearing to a great extent, resulting in the bearing to produce huge heat. When the viscosity of the oil is too high, the overall fluidity is greatly reduced, and the bearing needs more power in the process of operation. This part of power is easily converted into heat energy, which leads to the increase of acceleration temperature. When the viscosity of the oil is too small, the lubrication effect will be reduced, and the friction resistance will increase, which will also cause the power increase in the bearing operation.

          

2.減速器溫度過高維修處理

2. Maintenance and treatment for over high temperature of reducer

在對減速器溫度過高進行維修處理的過程中，操作人員要對混凝土攪拌機減速器軸承進行控制，要對軸承進行定期檢查，觀察軸承的整體使用狀況。對出現異常摩擦的軸承要及時進行調整或更換，降低可能產生的局部熱量。操作人員要對油的黏度進行嚴格控制，依照設備要求及運行參數對油的密度進行計算，對黏度等級進行合理選取，降低可能出現的局部高溫。

In the process of repairing the reducer with too high temperature, the operator should control the bearing of the concrete mixer reducer, regularly inspect the bearing, and observe the overall service condition of the bearing. The bearing with abnormal friction should be adjusted or replaced in time to reduce the possible local heat. Operators should strictly control the viscosity of the oil, calculate the density of the oil according to the equipment requirements and operating parameters, and reasonably select the viscosity grade to reduce the possible local high temperature.

以上是關于小型混凝土攪拌機減速器處理溫度過高的相關內容介紹，希望對你們有所幫助，想要了解更多內容歡迎點擊小型混凝土攪拌機官網。

The above is about the small concrete mixer reducer processing temperature is too high, hope to help you, want to learn more, welcome to click the small concrete mixer official website.