1. Look at the material. The material is the decisive factor for the quality of the filter element. A good material has the characteristics of corrosion resistance, pressure resistance and small resistance. For example, the Italian production quality of polymer fiber is very reliable.

2、觀察濾筒的端蓋和金屬的接觸是不是嚴絲合縫。

2. Observe whether the contact between the end cover of the filter cartridge and the metal is tight.

3、看自動上料攪拌車濾芯是否可以循環使用，能不能用水清洗，使用壽命大概多久。

3. Check whether the filter element of the automatic feeding mixer can be recycled, whether it can be cleaned with water, and how long its service life is.

4、考慮自動上料攪拌車的濾芯精度和透氣性如何。

4. Consider the filter element accuracy and air permeability of automatic feeding mixer.

我們通常根據物料的顆粒大小進行選擇，對于顆粒較大的物料，可選擇過濾精度較大的過濾器，反之對于顆粒較小的粉末或者納米級物料的話，則必須選擇高精度的過濾器了。這樣才能真正實現自動上料攪拌車無塵化操作自動，如何辨別自動上料攪拌車濾芯好壞達到提高產品質量的目的。

We usually choose according to the particle size of the material. For materials with large particles, we can choose a filter with high filtering accuracy. On the contrary, for powder or nano materials with small particles, we must choose a high-precision filter. In this way, we can truly realize the dust-free operation of the automatic feeding mixer, and how to distinguish the filter element of the automatic feeding mixer, so as to improve the product quality.

您或許感興趣的文章：

Articles you may be interested in:

1、上下料時間參數不合理：自動上料機因料倉內無法加裝料位機，所以行業基本都有時間控制。如何設置時間參數，上下料時間設置其實很簡單，在初次使用時，先設置一個小的時候，然后根據每次吸料位置慢慢加，當達到料位達到吸料口的時間，再減去一秒就是合理時間。放料時間是確保放完料再加一秒。這樣做有兩個好處：一是料位太高對濾芯傷害特別大，二是每次料都能放干凈。

1. Unreasonable loading and unloading time parameters: since the automatic loading machine cannot be equipped with a material level machine in the silo, the industry basically has time control. How to set the time parameter? The setting of loading and unloading time is actually very simple. In the first use, set an hour first, and then slowly add it according to each suction position. When the material level reaches the suction port, subtract one second to be a reasonable time. The discharging time is to ensure that one second is added after discharging. This has two advantages: one is that the material level is too high, which is particularly harmful to the filter element; the other is that the material can be cleaned every time.

2、自動上料攪拌車進料口給料量是否合理：正確的方式是物料在吸料口和空氣形成一定的氣物混合比，在氣流的推動下均勻流入上料機。這個時候我們需要將料槍設計帶有補氣功能。如果物料積壓時間過長可能很硬，這個時候需要在料槍上裝一個振蕩器，敲碎結塊的物料。

2. Whether the feeding amount at the feeding port of the automatic feeding mixer is reasonable: the correct way is that the materials form a certain gas-solid mixing ratio between the suction port and the air, and flow evenly into the feeding machine under the promotion of the air flow. At this time, we need to design the material gun with air replenishment function. If the material backlog is too long, it may be hard. At this time, an oscillator needs to be installed on the material gun to break the caked materials.

自動上料攪拌機 為您提供了以上的精彩內容，更多的精彩內容請點擊進入我們的網站：http://www.wishnailspa.com我們后續會有更多的內容等您查看。

The automatic feeding mixer provides you with the above wonderful contents. For more wonderful contents, please click to enter our website: http://www.wishnailspa.com We will have more content for you to check later.