日日夜夜天天,亚洲av永久无码精品放毛片,熟女少妇丰满一区二区,狠狠人妻777

歡迎您訪問萊州聚峰機械有限公司網站!
點擊撥打服務熱線:400-879-1999
大家都在搜: 四驅越野叉車 四驅越野叉車B 四驅越野叉車A

混凝土攪拌機傳動軸的使用注意事項

來源:http://www.wishnailspa.com/日期:2022-09-19

概述:混凝土攪拌機的傳動軸是一個高轉速、少支承的旋轉體,因此它的動平衡是關重要的。一般在出廠前都要進行測試和調整,所以我們?cè)谑褂没炷?
混凝土攪拌機的傳動軸是一個高轉速、少支承的旋轉體,因此它的動平衡是關重要的。一般在出廠前都要進行測試和調整,所以我們?cè)谑褂没炷翑嚢铏C(jī)傳動軸的時候?yàn)榱舜_?;炷翑嚢铏C(jī)傳動軸的正常工作,延長其使用壽命,應注意以下幾點事項:
The drive shaft of concrete mixer is a rotating body with high speed and few supports, so its dynamic balance is crucial. Generally, the test and adjustment shall be carried out before leaving the factory. Therefore, in order to ensure the normal operation of the drive shaft of the concrete mixer and extend its service life, we should pay attention to the following points when using the drive shaft of the concrete mixer:
1、嚴禁混凝土攪拌機用高速檔起步。
1. It is forbidden to start the concrete mixer with high gear.
2、嚴禁猛抬混凝土攪拌機離合器踏板。
2. It is strictly forbidden to lift the clutch pedal of concrete mixer.
混凝土攪拌機
3、嚴禁混凝土攪拌機超載、超速行駛。
3. Overload and overspeed of concrete mixer are strictly prohibited.
4、應經常檢查傳動軸工作狀況。
4. Always check the working condition of the drive shaft.
5、應經常檢查傳動軸吊架緊固情況,支承橡膠是否損壞,傳動軸各連接部位是否松曠,傳動軸是否變形。
5. Frequently check the fastening of the transmission shaft hanger, whether the support rubber is damaged, whether the connection parts of the transmission shaft are loose, and whether the transmission shaft is deformed.
6、為了保證混凝土攪拌機傳動軸的動平衡,應經常注意平衡焊片是否脫焊。新傳動軸組件是配套提供的,在新傳動軸裝車時應注意伸縮套的裝配標記,應保證凸緣叉在一個平面內。在維修拆卸傳動軸時,應在伸縮套與凸緣軸上打印裝配標記,以備重新裝配時保持原裝配關系不變。
6. In order to ensure the dynamic balance of the drive shaft of the concrete mixer, it is necessary to pay attention to whether the balance welding lug is off. The new transmission shaft components are provided together. When the new transmission shaft is loaded, pay attention to the assembly mark of the telescopic sleeve, and ensure that the flange fork is in one plane. When repairing and disassembling the transmission shaft, the assembly marks shall be printed on the telescopic sleeve and the flange shaft to keep the original assembly relationship unchanged during reassembly.
混凝土攪拌機傳動軸的使用注意事項就講解到這里了,六方面的內容希望能夠給您好的解答,當然也是需要多加保養的,不然非常容易就會出現大的問題,關注我們http://www.wishnailspa.com,了解更多!
Here are the precautions for the use of the drive shaft of the concrete mixer. I hope to give you a good answer to the six aspects. Of course, it also needs more maintenance. Otherwise, it is very easy to have big problems. Pay attention to us http://www.wishnailspa.com , learn more!

截屏,微信識別二維碼