When the concrete mixer is running, it should be stopped completely before feeding into the hopper. Before use, it is necessary to check the flexibility of clutch and brake, whether the steel wire rope is damaged and its damage degree, and then check the integrity of the protection device, and then carry out debugging.

　　攪拌機軸端在強度較高應力的工作下他它的使用壽命會大大降低，從而會導致軸端漏漿。這一問題出現的原因是浮動密封損壞，要更換新的浮動密封，另外平時也要注意及時對各部位零部件進行維護保養，并且適時更換其中的密封件。

　　The service life of mixer shaft end will be greatly reduced under the condition of high strength and high stress, which will lead to slurry leakage at the shaft end. The reason for this problem is that the floating seal is damaged, so it is necessary to replace the new floating seal. In addition, it is necessary to maintain the parts in time and replace the seals in time.
           

　　當混凝土攪拌機突然斷電或出現故障過載工作，需要清理剩余材料的鼓，然后再檢查和修復的加載它不允許以防止啟動時混凝土攪拌機電流過大，造成電機損壞等現象。混凝土攪拌機的使用人員要進入攪拌機滾筒清洗和維護，應該控制好電源，以防止意外的發生。

　　When the concrete mixer is suddenly powered off or overloaded due to fault, it is necessary to clean the drum of surplus materials, and then check and repair the loading. It is not allowed to prevent the concrete mixer from excessive current when starting, resulting in motor damage and other phenomena. The user of concrete mixer should enter the mixer drum for cleaning and maintenance, and should control the power supply to prevent accidents.

　　我們?cè)谑褂没炷翑嚢铏C(jī)的過程中不僅要注意要嚴格按照標準的方法操作，同時也要對機器進行定期的維修和保養。

　　In the process of using the concrete mixer, we should not only pay attention to strictly follow the standard operation method, but also carry out regular repair and maintenance of the machine.