攪拌機耐磨配件在攪拌混凝土材料的過程中作用是不可忽視的，因為它長期處于運轉過程中，長期的負荷會加劇攪拌機耐磨配件的損壞或使用不佳。然后會對攪拌均勻徹 底有很大影響。我們需要了解到攪拌機耐磨配件損壞的主要原因，并在日常的使用時留心避免這些情況的出現。

The function of the mixer wear-resistant parts in the process of mixing concrete materials can not be ignored, because it is in the process of long-term operation, and the long-term load will aggravate the damage or poor use of the mixer wear-resistant parts. Then it will have a great influence on the uniformity and thoroughness of mixing. We need to understand the main reasons for the damage of mixer wear-resistant parts, and pay attention to avoid these situations in daily use.
             

在攪拌開始之后，攪拌機的高速運轉也會帶動攪拌機耐磨配件的不斷攪拌混凝土，由于混凝土的組成比較復雜，長期吸附在攪拌機耐磨配件上也會讓磨損加快。同時攪拌機使用一段時間后，緊固攪拌襯板的螺栓就會逐漸松開，從而使其出現扭轉，角度遠離了標準自然就會讓磨損情況更加嚴重。

After the beginning of mixing, the high-speed operation of the mixer will also drive the continuous mixing of concrete with wear-resistant parts of the mixer. Due to the complex composition of concrete, long-term adsorption on the wear-resistant parts of the mixer will also accelerate the wear. At the same time, after the mixer has been used for a period of time, the bolts that fasten the mixing lining plate will gradually loosen, so that it will twist, and the angle away from the standard will naturally make the wear situation more serious.

其實混凝土攪拌機耐磨配件的磨損幾乎是無法避免的，我們可以做的就是購買質量相對比較好的攪拌機耐磨配件，同時在磨損時可以及時修復，維持比較長的使用壽命。

In fact, the wear of concrete mixer wear-resistant parts is almost inevitable, what we can do is to buy relatively good quality mixer wear-resistant parts, and at the same time, it can be repaired in time to maintain a relatively long service life.