The concrete mixer has been used for a long time. Even though it has been well maintained and repaired, there are still various problems. For example, some users found that the clutch of their equipment was suddenly abnormal.

　　混凝土攪拌機離合器損壞的原因動力換擋變速器離合器接合時，液壓油的壓力克服彈簧力壓緊摩擦片。隨著液壓油壓力的升高，摩擦片與金屬盤接觸并逐漸壓緊，使離合器將飛輪動力平穩地傳遞到變速器輸入軸。

　　When the clutch of the power shift transmission engages, the pressure of the hydraulic oil overcomes the spring force to press the friction plate. As the hydraulic oil pressure rises, the friction plate contacts the metal plate and gradually compacts, allowing the clutch to smoothly transfer flywheel power to the transmission input shaft.

　　混凝土攪拌機離合器活塞密封性的檢測裝載機行走無力或油溫過高時，就需要判斷是離合器活塞密封不嚴還是油壓不足引起的，但常規檢測手段有時很難斷定是哪個原因引起故障，尤其是在混凝土攪拌機無動力的情況下，檢查組裝好的變速器總成的各密封環就更困難了。此時，可采用氣壓閥進行測試。

　　Concrete mixer clutch piston sealing detection loader walking unable or when the oil temperature is too high, you need to determine is the clutch piston seal is lax or low oil pressure, but the conventional detection method which is sometimes difficult to determine causes of failure, especially in the case of concrete mixer unpowered, check the sealing ring of the assembled transmission assembly is even more difficult. At this point, a pneumatic valve can be used for testing.

　　在混凝土攪拌機的工作過程中，其工作效率的判斷主要是根據工作參數。在混煉過程中，參數控制與混煉系統不僅相互聯系，而且相互制約?；炷翑嚢铏C(jī)的主要參數是壓頭、軸功率和出漿量。兩個參數之間存在一定的比例關系。因此，在控制其中一個參數的過程中，要保證其他因素的科學性和合理性。另外，混凝土攪拌機在工作完成之后，需要將其中的雜物清理干凈。這中做法主要是為了延長混凝土攪拌機的使用壽命，提高混凝土攪拌工作的質量。

　　In the working process of concrete mixer, its working efficiency is mainly judged according to the working parameters. In the mixing process, the parameter control and the mixing system are not only interrelated, but also restricted each other. The main parameters of concrete mixer are pressure head, shaft power and slurry quantity. There is a certain proportion relationship between the two parameters. Therefore, in the process of controlling one parameter, it is necessary to ensure the scientificity and rationality of other factors. In addition, after the concrete mixer is finished, it is necessary to clean up the debris. The practice in this basically is to prolong the service life of concrete mixer, improve the quality of concrete mixing work.

　　混凝土攪拌機離合器異?；顒?dòng)這一問題的原因我們已經找到了，那么就需要做好相關的預防措施了，當然日常定期的維護和保養不要缺少了，這樣做會適當延長該設備的使用時間，還是比較值得的。更多內容就來http://www.wishnailspa.com網站了解！

　　We have found the cause of the abnormal activity of the clutch of the concrete mixer, so it is necessary to do a good job of the relevant preventive measures, of course, the daily regular maintenance and maintenance do not lack, it will appropriately extend the use time of the equipment, or more worthwhile. For more information, visit http://www.wishnailspa.com!