關于混凝土攪拌機上料裝置的問題
來源：http://www.wishnailspa.com/日期：2022-05-15
概述：混凝土攪拌機會在使用期間不可避免的發生故障，比如說在攪拌時發現有碰撞聲音，或者上料時有問題出現，下面我們主要來看看關于混凝土攪拌機
混凝土攪拌機會在使用期間不可避免的發生故障，比如說在攪拌時發現有碰撞聲音，或者上料時有問題出現，下面我們主要來看看關于混凝土攪拌機上料裝置的問題內容。
The concrete mixer will inevitably fail during use. For example, a collision sound is found during mixing, or there are problems during feeding. Let's take a look at the problem-solving contents of the feeding device of the concrete mixer.
混凝土攪拌時有碰撞聲
There is collision sound during concrete mixing
原因：拌鏟或刮板松脫或翹曲致使和攪拌筒碰撞。辦法：緊固拌鏟或刮板的連接螺栓，檢修，調整拌鏟，刮板和筒壁之間的間隙。
Cause: the mixing shovel or scraper is loose or warped, resulting in collision with the mixing drum. Solution: fasten the connecting bolts of the mixing shovel or scraper, repair and adjust the gap between the mixing shovel, scraper and the cylinder wall.
拌鏟轉動不靈運轉聲異常
The mixing shovel does not rotate properly, and the operation sound is abnormal
原因：攪拌裝置緩沖彈簧失效。拌合料中有大顆粒物料卡住拌鏟。加料過多，動力超載。
Cause: buffer spring of mixing device failed. The mixing shovel is stuck by large particles in the mixture. Excessive feeding and power overload.
辦法：更換彈簧。卡賽的物料。按規定進料容量投料。
Solution: replace the spring. Clear the material card of the game. Feed according to the specified feeding capacity.
運轉中卸料門漏漿
Slurry leakage of discharge door during operation
原因：卸料門封閉不嚴密。卸料門周圍殘存的粘接物過厚。
Cause: the discharge door is not tightly closed. The residual adhesive around the discharge door is too thick.
排出方法：調整卸料底板下方的螺栓，使卸料門封閉嚴密。殘存的粘結物料。
Discharge method: adjust the bolts under the unloading base plate to make the unloading door tightly closed. Remove the remaining bonding materials.
上料斗運行不平穩
The operation of the upper hopper is not stable
原因：上料軌道翹曲不平，料斗滾輪接觸不良。
Cause: the feeding track is warped and uneven, and the hopper roller is in poor contact.
排出方法：檢查調整兩條軌道，使軌道平直，軌面平行。、
Discharge method: check and adjust the two rails to make them straight and parallel
上料斗上升時越過上點而拉壞牽引機構
When the upper hopper rises, it crosses the upper solstice point and damages the traction mechanism
原因：自動限位失靈。自動限位擋板變形而不起作用。
Cause: automatic limit failure. The automatic limit baffle is deformed and does not work.
辦法：檢修或更換限位裝置。調整限位擋板。
Solution: repair or replace the limit device. Adjust the limit baffle.
攪拌機軸端漏漿
Slurry leakage at shaft end of mixer
混凝土攪拌機軸端漏漿是因為在長時間的工作中，攪拌機浮動密封損壞導致?；炷翑嚢铏C(jī)軸端是受力集中的部位。混凝土攪拌機在工作中，軸端受力，因此，零部件的磨損也就相應要大。
The slurry leakage at the shaft end of the concrete mixer is caused by the damage of the floating seal of the mixer during long-time operation. The shaft end of concrete mixer is the part with concentrated stress. During the operation of concrete mixer, the stress on the shaft end is the largest, so the wear of parts is correspondingly large.
及時對混凝土攪拌機進行維護保養，適時更換其中的密封件也很重要。更多相關內容就來關注我們的網站
www.wishnailspa.com咨詢了解吧！
It is also important to maintain the concrete mixer in time and replace the seals in time. For more information, please visit our website at www.wishnailspa.com Com consultation to understand!
全國服務熱線
點擊撥打服務熱線：400-879-1999
